JG542A Hewlett Packard Enterprise 5500-48G-PoE + -4SFP HI Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Fekete HP 5500-48G-PoE + -4SF
Ár:
3.643.163 Ft
(2.868.632 Ft + ÁFA)
| Gyártó cikkszám: | JG542A |
| Cikkszám: | JG542A |
| Elérhetőség: | Kérjen friss ajánlatot emailben! |
| Átlagos értékelés: | Nem értékelt |
| Gyártó: | HP |
Leírás és Paraméterek
JG542A Hewlett Packard Enterprise 5500-48G-PoE+-4SFP HI Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black HP 5500-48G-PoE+-4SFP HI Switch with 2 Interface Slots
Hewlett Packard Enterprise 5500-48G-PoE+-4SFP HI, Managed, L3, Gigabit Ethernet (10/100/1000), Black, SDRAM, 50/60 Hz
Hewlett Packard Enterprise 5500-48G-PoE+-4SFP HI. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000). Colour of product: Black. Memory type: SDRAM. AC input frequency: 50/60 Hz
- Advanced classifier-based QoS
- Traffic policing
- Powerful QoS feature
- Storm restraint
- Complete session logging
- Remote configuration and management
- Manager and operator privilege levels
- Auto-MDIX
- Packet storm protection
- Ethernet operations, administration and maintenance (OAM)
- Flow control
- Fixed 10 GbE ports
- Hardware-based wire-speed access control lists (ACLs)
- Nonblocking architecture
- Advanced classifier-based QoS
It classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis. - Traffic policing
It supports Committed Access Rate (CAR) and line rate. - Powerful QoS feature
It creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark. - Storm restraint
It allows limitation of broadcast, multicast, and unknown unicast traffic rate to cutdown on unwanted broadcast traffic on the network. - sFlow
sFlow provides scalable ASIC-based wire-speed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes. - Complete session logging
It provides detailed information for problem identification and resolution. - Remote configuration and management
It enables configuration and management through a secure Web browser or a CLI located at a remote device. - Manager and operator privilege levels
It provides read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces. - Auto-MDIX
It provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports. - Packet storm protection
It protects against broadcast, multicast, or unicast storms with user-defined thresholds. - Ethernet operations, administration and maintenance (OAM)
It detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the status of the link between the two devices. - Flow control
It provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations. - Fixed 10 GbE ports
It provides two fixed SFP+ ports for a 20 GbE connection to the network without the need for additional extension interface modules. - Hardware-based wire-speed access control lists (ACLs)
It helps provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation. - Nonblocking architecture
It delivers up to 224 Gbps of wire-speed switching with a nonblocking switching fabric and up to 167 million pps throughput.
Vélemények
Erről a termékről még nem érkezett vélemény.
Írja meg véleményét!
